NIPA Branch net-next-hw-2025-11-29--00-00

Branches
Base trees

No differences found.

New patches
@@ -1,246 +1,269 @@
tmp: fix defering freeing of zc Tx skbs
nipa: fbnic: link up on QEMU
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
[+] ynl: samples: Fix spelling mistake "failedq" -> "failed"
[+] net: atm: targetless need more input msg
[+] net/sched: ets: Always remove class from active list before deleting in ets_qdisc_change
[+] Documentation: netconsole: Document send_msg configfs attribute
[+] selftests/netconsole: Switch to configfs send_msg interface
[+] netconsole: Add configfs attribute for direct message sending
[+] netconsole: extract message fragmentation into send_msg_udp()
[+] net: mdio: reset PHY before attempting to access ID register
[+] l2tp: fix double dst_release() on sk_dst_cache race
[+] net: enetc: convert to use .get_rx_ring_count
[+] net: dpaa2: convert to use .get_rx_ring_count
[+] net: gianfar: convert to use .get_rx_ring_count
[+] tls: check return value of strp_load_anchor_with_queue
[+] net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()
[+] l2tp: correct debugfs label for tunnel tx stats
[+] net: dsa: b53: allow VID 0 for BCM5325/65
[+] net: dsa: b53: fix BCM5325/65 ARL entry VIDs
[+] net: dsa: b53: fix BCM5325/65 ARL entry multicast port masks
[+] net: dsa: b53: fix CPU port unicast ARL entries for BCM5325/65
[+] net: dsa: b53: use same ARL search result offset for BCM5325/65
[+] net: dsa: b53: fix extracting VID from entry for BCM5325/65
[+] net: dsa: b53: fix VLAN_ID_IDX write size for BCM5325/65
[+] team: Add matching error label for failed action
net: fec: ERR007885 Workaround for XDP TX path
selftests: net: py: handle interrupt during cleanup
can: raw: fix build without CONFIG_CAN_DEV
selftests: netfilter: nft_flowtable.sh: Add the capability to send IPv6 TCP traffic
net: phy: microchip_rds_ptp: add HW timestamp configuration reporting
net: phy: microchip_rds_ptp: improve HW ts config logic
net: phy: micrel: add HW timestamp configuration reporting
net: phy: micrel: improve HW timestamping config logic
selftests: net: add a hint about MACAddressPolicy=persistent
net/hsr: fix NULL pointer dereference in skb_clone with hw tag insertion
net: netpoll: initialize work queue before error checks
selftests: bonding: add delay before each xvlan_over_bond connectivity check
net: thunderbolt: Allow reading link settings
net: thunderbolt: Allow changing MTU of the device
net: thunderbolt: Allow changing MAC address of the device
ynl: fix schema check errors
ynl: fix a yamllint warning in ethtool spec
tools: ynl: add a lint makefile target
tools: ynl: add schema checking
net: dsa: tag_yt921x: use the dsa_xmit_port_mask() helper
net: dsa: tag_xrs700x: use the dsa_xmit_port_mask() helper
net: dsa: tag_trailer: use the dsa_xmit_port_mask() helper
net: dsa: tag_rzn1_a5psw: use the dsa_xmit_port_mask() helper
net: dsa: tag_rtl8_4: use the dsa_xmit_port_mask() helper
net: dsa: tag_rtl4_a: use the dsa_xmit_port_mask() helper
net: dsa: tag_qca: use the dsa_xmit_port_mask() helper
net: dsa: tag_ocelot: use the dsa_xmit_port_mask() helper
net: dsa: tag_mxl_gsw1xx: use the dsa_xmit_port_mask() helper
net: dsa: tag_mtk: use the dsa_xmit_port_mask() helper
net: dsa: tag_ksz: use the dsa_xmit_port_mask() helper
net: dsa: tag_hellcreek: use the dsa_xmit_port_mask() helper
net: dsa: tag_gswip: use the dsa_xmit_port_mask() helper
net: dsa: tag_brcm: use the dsa_xmit_port_mask() helper
net: dsa: introduce the dsa_xmit_port_mask() tagging protocol helper
net: phy: aquantia: check for NVMEM deferral
Merge tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
net: bcmgenet: extract GRXRINGS from .get_rxnfc
net: bnxt: extract GRXRINGS from .get_rxnfc
net/sched: sch_cake: share shaper state across sub-instances of cake_mq
net/sched: sch_cake: Share config across cake_mq sub-qdiscs
net/sched: sch_cake: Add cake_mq qdisc for using cake on mq devices
net/sched: sch_cake: Factor out config variables into separate struct
selftests/net: remove unnecessary MTU config in big_tcp.sh
ipv6: remove IP6SKB_FAKEJUMBO flag
net: gso: do not include jumbogram HBH header in seglen calculation
netrom: fix possible deadlock between nr_rt_ioctl() and nr_rt_device_down()
net: devmem: convert binding refcount to percpu_ref
selftests/vsock: add tests for namespace deletion and mode changes
selftests/vsock: add tests for host <-> vm connectivity with namespaces
selftests/vsock: add namespace tests for CID collisions
selftests/vsock: add tests for proc sys vsock ns_mode
selftests/vsock: use ss to wait for listeners instead of /proc/net
selftests/vsock: add vm_dmesg_{warn,oops}_count() helpers
selftests/vsock: prepare vm management helpers for namespaces
selftests/vsock: add namespace helpers to vmtest.sh
vsock: add netns support to virtio transports
virtio: set skb owner of virtio_transport_reset_no_sock() reply
vsock: add netns to vsock core
vsock: a per-net vsock NS mode state
nfp: tls: Avoid -Wflex-array-member-not-at-end warnings
net: ipconfig: Replace strncpy with strscpy in ic_proto_name
net: mana: Handle hardware recovery events when probing the device
selftests: ipv6_icmp: add tests for ICMPv6 handling
ipv6: use the right ifindex when replying to icmpv6 from localhost
selftests/tc-testing: Update test cases with netem duplicate
selftests/tc-testing: Add a test case for mq with netem duplicate
selftests/tc-testing: Add a test case for piro with netem duplicate
selftests/tc-testing: Add a nested netem duplicate test
net_sched: Check the return value of qfq_choose_next_agg()
net_sched: Prevent using netem duplication in non-initial user namespace
net_sched: Implement the right netem duplication behavior
Revert "selftests/tc-testing: Add tests for restrictions on netem duplication"
Revert "net/sched: Restrict conditions for adding duplicating netems to qdisc tree"
net: ti: icssm-prueth: Add support for ICSSM RSTP switch
net: ti: icssm-prueth: Add switchdev support for icssm_prueth driver
net: ti: icssm-prueth: Add helper functions to configure and maintain FDB
net: Remove KMSG_COMPONENT macro
net: mctp: test: move TX packetqueue from dst to dev
wifi: mac80211: allow sharing identical chanctx for S1G interfaces
wifi: nl80211: vendor-cmd: intel: fix a blank kernel-doc line warning
wifi: cfg80211: include s1g_primary_2mhz when comparing chandefs
wifi: cfg80211: include s1g_primary_2mhz when sending chandef
wifi: ieee80211: correct FILS status codes
Merge tag 'mt76-next-2025-11-24' of https://github.com/nbd168/wireless
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
wifi: mt76: mt792x: fix wifi init fail by setting MCU_RUNNING after CLC load
wifi: mt76: Strip whitespace from build ddate
wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt7996: skip ieee80211_iter_keys() on scanning link remove
wifi: mt76: mt7996: skip deflink accounting for offchannel links
wifi: mt76: Move mt76_abort_scan out of mt76_reset_device()
wifi: mt76: mt7996: move mt7996_update_beacons under mt76 mutex
wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event()
wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
wifi: mt76: mt7996: fix EMI rings for RRO
wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
wifi: mt76: mt7996: fix MLO set key and group key issues
wifi: mt76: mt7996: fix MLD group index assignment
wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
wifi: mt76: mt7996: set link_valid field when initializing wcid
wifi: mt76: mt7996: fix teardown command for an MLD peer
wifi: mt76: mt7996: fix several fields in mt7996_mcu_bss_basic_tlv()
wifi: mt76: mt7996: support fixed rate for link station
wifi: mt76: mt7996: fix implicit beamforming support for mt7992
wifi: mt76: mt7996: no need to wait ACK event for SDO command
wifi: mt76: mt7996: fix max nss value when getting rx chainmask
wifi: mt76: mt7925: cqm rssi low/high event notify
wifi: mt76: replace use of system_wq with system_percpu_wq
wifi: mt76: adjust BSS conf pointer handling
Revert "wifi: mt76: mt792x: improve monitor interface handling"
wifi: mt76: mmio_*_copy fix byte order and alignment
wifi: mt76: mt7925: disable auto regd changes after user set
wifi: mt76: mt7925: add auto regdomain switch support
wifi: mt76: mt7925: improve EHT capability control in regulatory flow
wifi: mt76: mt7925: refactor regulatory notifier flow
wifi: mt76: mt7925: refactor CLC support check flow
wifi: mt76: mt7925: refactor regulatory domain handling to regd.[ch]
wifi: mt76: Use of_reserved_mem_region_to_resource() for "memory-region"
wifi: mt76: mt7996: fix typos in comments
wifi: mt76: mt7996: Add NPU offload support to MT7996 driver
wifi: mt76: Introduce the NPU generic layer
wifi: mt76: Add the capability to set TX token start ID
wifi: mt76: Add mt76_dev pointer in mt76_queue struct.
wifi: mt76: Move Q_READ/Q_WRITE definitions in dma.h
wifi: mt76: mt7996: Remove useless check in mt7996_msdu_page_get_from_cache()
wifi: mt76: relicense to BSD-3-Clause-Clear
wifi: mt76: fix license/copyright of util.h
wifi: mt76: use GFP_DMA32 for page_pool buffer allocation
wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks
wifi: mt76: mt7915: add bf backoff limit table support
dt-bindings: net: wireless: mt76: introduce backoff limit properties
dt-bindings: net: wireless: mt76: Document power-limits country property
wifi: mt76: Fix DTS power-limits on little endian systems
wifi: mt76: connac: Replace memcpy + hard-coded size with strscpy
wifi: mt76: mt7996: Remove unnecessary link_id checks in mt7996_tx
wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx()
wifi: brcmfmac: Add DMI nvram filename quirk for Acer A1 840 tablet
wifi: cfg80211: stop radar detection in cfg80211_leave()
wifi: cfg80211: use cfg80211_leave() in iftype change
wifi: mac80211: fix channel switching code
Merge tag 'rtw-next-2025-11-21-v2' of https://github.com/pkshih/rtw
wifi: rtl8xxxu: Enable 40 MHz width by default
wifi: rtl8xxxu: Fix RX channel width reported by RTL8192FU
wifi: rtl8xxxu: Fix the 40 MHz subchannel for RTL8192EU, RTL8723BU
wifi: rtl8xxxu: Make RTL8192CU, RTL8723AU TX with 40 MHz width
wifi: rtl8xxxu: Fix HT40 channel config for RTL8192CU, RTL8723AU
wifi: rtw89: 8852a: correct field mask of reset DAC/ADC FIFO
wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users
wifi: rtlwifi: add WQ_UNBOUND to alloc_workqueue users
wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb()
wifi: mac80211: refactor CMAC packet handlers
wifi: mac80211: refactor CMAC crypt functions
wifi: mac80211: utilize the newly defined CMAC constants
wifi: mac80211: add generic MMIE struct defines
wifi: mac80211: fix CMAC functions not handling errors
wifi: ipw2x00: replace use of system_wq with system_percpu_wq
wifi: cfg80211: replace use of system_unbound_wq with system_dfl_wq
wifi: cw1200: add WQ_PERCPU to alloc_workqueue users
wifi: wfx: add WQ_PERCPU to alloc_workqueue users
wifi: qtnfmac: add WQ_PERCPU to alloc_workqueue users
wifi: cfg80211: Add support for 6GHz AP role not relevant AP type
wifi: rtw89: Add default ID 0bda:b831 for RTL8831BU
wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring()
wifi: rtw89: use separated function to set RX filter
wifi: rtw89: correct user macid mask of RX info for RTL8922D
wifi: rtw89: update format of addr cam H2C command
wifi: rtw89: add addr cam H2C command v1
wifi: rtw89: fill addr cam H2C command by struct
wifi: rtw89: align RA H2C format v1 for RTL8922A
wifi: rtw89: fw: print band and port where beacon update on
wifi: rtw89: phy: ignore DCFO if not defined in chip_info
wifi: rtw89: phy: consider type 15 in BB gain table
wifi: rtw89: mac: update wcpu_on to download firmware for RTL8922D
wifi: rtw89: mac: remove undefined bit B_BE_PPDU_MAC_INFO
wifi: rtw89: phy: calling BB pre-init by chips with/without BB MCU
wifi: rtw89: mac: separate pre-init code before downloading firmware
wifi: rtw89: fw: part size to download firmware by header info
wifi: rtw89: flush TX queue before deleting key
wifi: rtw89: rtw8852bu: Added dev id for ASUS AX57 NANO USB Wifi dongle
wifi: rtw89: configure RX antenna if chips can support
wifi: rtw89: do RF calibration once setting channel when running pure monitor mode
wifi: rtw89: consider data rate/bandwidth/GI for injected packets
wifi: rtw89: phy: fix out-of-bounds access in rtw89_phy_read_txpwr_limit()
wifi: rtw89: 8852c: add compensation of thermal value from efuse calibration
wifi: rtw89: debug: add parser to diagnose along DIAG_MAC fw element
wifi: rtw89: fw: parse firmware element of DIAG_MAC
wifi: rtw89: pci: add to read PCI configuration space from common code
wifi: rtlwifi: rtl8188ee: correct allstasleep in P2P PS H2C command
wifi: rtw89: Enable the new rtw89_8852au module
wifi: rtw89: Add rtw8852au.c
wifi: rtw89: 8852a: Accept USB devices and load their MAC address
wifi: rtw89: Add rtw8852a_hfc_param_ini_usb
wifi: rtw89: Add rtw8852a_dle_mem_usb
wifi: rtw89: Use the correct power sequences for USB/SDIO
wifi: rtw89: process TX wait skbs for USB via C2H handler
wifi: rtw89: provide TX reports for management frames
wifi: rtw89: handle IEEE80211_TX_CTL_REQ_TX_STATUS frames for USB
wifi: rtw89: usb: anchor TX URBs
wifi: rtw89: fill TX descriptor of FWCMD in shortcut
wifi: rtw89: implement C2H TX report handler
wifi: rtw89: refine rtw89_core_tx_wait_complete()
wifi: rtw89: usb: use ieee80211_free_txskb() where appropriate
wifi: rtw89: usb: fix leak in rtw89_usb_write_port()
wifi: rtw89: usb: use common error path for skbs in rtw89_usb_rx_handler()
wifi: rtw88: Add BUFFALO WI-U3-866DHP to the USB ID list
wifi: rtw88: 8822c: use fixed rate and bandwidth to reply CSI packets
wifi: rtw89: Enable the new rtw89_8852cu module
wifi: rtw89: Add rtw8852cu.c
wifi: rtw89: 8852c: Accept USB devices and load their MAC address
wifi: rtw89: Add rtw8852c_hfc_param_ini_usb
wifi: rtw89: Add rtw8852c_dle_mem_usb{2,3}
wifi: rtw89: 8852c: Fix rtw8852c_pwr_{on,off}_func() for USB
wifi: rtw89: Fix rtw89_mac_dmac_func_pre_en_ax() for USB/SDIO
wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_post_init() for RTL8852CU
wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_pre_init() for RTL8852CU
wifi: rtw89: usb: Move bulk out map to new struct rtw89_usb_info
wifi: rtw89: Add rtw89_core_get_ch_dma_v2()
wifi: rtw89: 8832cu: turn off TX partial mode
wifi: rtw89: improve scan time on 6 GHz band
wifi: rtw89: restart hardware to recover firmware if power-save becomes abnormal
wifi: rtw89: 8852c: fix ADC oscillation in 160MHz affecting RX performance
wifi: rtw89: regd: apply ACPI policy even if country code is programmed
wifi: rtw89: support EHT rate pattern via bitrate mask
wifi: rtw89: mlo: handle needed H2C when link switching is requested by stack
wifi: rtw89: use skb_dequeue() for queued ROC packets to prevent racing
wifi: rtw89: splice C2H events queue to local to prevent racing
wifi: rtl8xxxu: Use correct power off sequence for RTL8192CU
wifi: rtl8xxxu: Dump the efuse right after reading it
wifi: rtl8xxxu: Report the signal strength only if it's known
wifi: rtw89: Replace hardcoded strings with helper functions
wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1
wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1
Test results