Using -Oline -j 72 W=1 redirect to /tmp/tmp.ESHyypLYu8 and /tmp/tmp.YrHSLVKRN0 LLVM=1 cc=clang clang version 18.1.1 (Fedora 18.1.1-1.fc40) Tree base: 19e6ad2c7578 ("net: phy: fix potential use of NULL pointer in phy_suspend()") Baseline building the tree make[1]: Entering directory '/home/nipa/net-next/wt-1/build_clang' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_clang' SYNC include/config/auto.conf GEN Makefile GEN Makefile mkdir -p /home/nipa/net-next/wt-1/build_clang/tools/objtool && make O=/home/nipa/net-next/wt-1/build_clang subdir=tools/objtool --no-print-directory -C objtool INSTALL libsubcmd_headers CALL ../scripts/checksyscalls.sh CHK kernel/kheaders_data.tar.xz CC net/xfrm/xfrm_device.o CC net/xfrm/xfrm_input.o CC [M] net/ipv4/esp4_offload.o CC [M] drivers/net/phy/phy_device.o CC [M] net/ipv4/esp4.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-crc16.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.o CC [M] drivers/net/can/m_can/m_can_pci.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-tef.o CC [M] drivers/net/can/m_can/tcan4x5x-core.o CC [M] drivers/net/can/usb/gs_usb.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.o CC [M] drivers/net/can/m_can/m_can_platform.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-timestamp.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-ethtool.o CC [M] drivers/net/can/rcar/rcar_canfd.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-dump.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.o LD [M] drivers/net/phy/libphy.o CC [M] drivers/net/can/m_can/tcan4x5x-regmap.o CC net/xfrm/xfrm_policy.o LD [M] drivers/net/can/m_can/tcan4x5x.o CC [M] drivers/net/can/m_can/m_can.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-core.o LD [M] drivers/net/can/spi/mcp251xfd/mcp251xfd.o AR net/xfrm/built-in.a AR net/built-in.a AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 NM .tmp_vmlinux.kallsyms2.syms KSYMS .tmp_vmlinux.kallsyms2.S AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin CC arch/x86/boot/compressed/kaslr.o VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o CC [M] drivers/net/phy/libphy.mod.o CC [M] drivers/net/can/rcar/rcar_canfd.mod.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd.mod.o CC [M] drivers/net/can/usb/gs_usb.mod.o CC [M] drivers/net/can/m_can/m_can.mod.o CC [M] drivers/net/can/m_can/m_can_pci.mod.o CC [M] drivers/net/can/m_can/m_can_platform.mod.o CC [M] drivers/net/can/m_can/tcan4x5x.mod.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#3377) LD [M] net/ipv4/esp4.ko LD [M] net/ipv4/esp4_offload.ko LD [M] drivers/net/phy/libphy.ko LD [M] drivers/net/can/rcar/rcar_canfd.ko LD [M] drivers/net/can/spi/mcp251xfd/mcp251xfd.ko LD [M] drivers/net/can/usb/gs_usb.ko LD [M] drivers/net/can/m_can/m_can.ko LD [M] drivers/net/can/m_can/m_can_pci.ko LD [M] drivers/net/can/m_can/m_can_platform.ko LD [M] drivers/net/can/m_can/tcan4x5x.ko Building the tree before the patch make[1]: Entering directory '/home/nipa/net-next/wt-1/build_clang' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_clang' SYNC include/config/auto.conf GEN Makefile GEN Makefile mkdir -p /home/nipa/net-next/wt-1/build_clang/tools/objtool && make O=/home/nipa/net-next/wt-1/build_clang subdir=tools/objtool --no-print-directory -C objtool INSTALL libsubcmd_headers CALL ../scripts/checksyscalls.sh CHK kernel/kheaders_data.tar.xz CC net/xfrm/xfrm_input.o CC net/xfrm/xfrm_policy.o AR net/xfrm/built-in.a AR net/built-in.a AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 NM .tmp_vmlinux.kallsyms2.syms KSYMS .tmp_vmlinux.kallsyms2.S AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin CC arch/x86/boot/compressed/kaslr.o VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#3378) Building the tree with the patch make[1]: Entering directory '/home/nipa/net-next/wt-1/build_clang' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_clang' SYNC include/config/auto.conf GEN Makefile GEN Makefile mkdir -p /home/nipa/net-next/wt-1/build_clang/tools/objtool && make O=/home/nipa/net-next/wt-1/build_clang subdir=tools/objtool --no-print-directory -C objtool INSTALL libsubcmd_headers CALL ../scripts/checksyscalls.sh CHK kernel/kheaders_data.tar.xz CC net/xfrm/xfrm_input.o CC net/xfrm/xfrm_policy.o AR net/xfrm/built-in.a AR net/built-in.a AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 NM .tmp_vmlinux.kallsyms2.syms KSYMS .tmp_vmlinux.kallsyms2.S AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin CC arch/x86/boot/compressed/kaslr.o VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#3379)