Using -Oline -j 72 W=1 redirect to /tmp/tmp.tYFMCP0vNR and /tmp/tmp.Oi9moI7MnA CC=ccache gcc gcc (GCC) 14.1.1 20240507 (Red Hat 14.1.1-1) Tree base: 4e5807f08d4f ("net: phy: add helpers to handle sfp phy connect/disconnect") Skip baseline build, not the first patch Building the tree before the patch make[1]: Entering directory '/home/nipa/net-next/wt-1/build_32bit' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_32bit' SYNC include/config/auto.conf GEN Makefile GEN Makefile CALL ../scripts/checksyscalls.sh CC net/ethtool/ioctl.o CC net/ethtool/eeprom.o CC net/ethtool/module.o CC [M] drivers/net/mdio/mdio-i2c.o CC drivers/net/phy/sfp-bus.o CC [M] drivers/net/phy/phylink.o CC [M] drivers/net/phy/qcom/at803x.o CC [M] drivers/net/phy/phy.o CC [M] drivers/net/phy/qcom/qca807x.o AR net/ethtool/built-in.a CC [M] drivers/net/phy/phy_device.o CC [M] drivers/net/phy/sfp.o AR net/built-in.a CC [M] drivers/net/phy/marvell10g.o CC [M] drivers/net/phy/marvell.o CC [M] drivers/net/phy/marvell-88x2222.o CC [M] drivers/net/ethernet/huawei/hinic/hinic_ethtool.o LD [M] drivers/net/ethernet/huawei/hinic/hinic.o AR drivers/net/phy/built-in.a CC [M] drivers/net/ethernet/mellanox/mlxsw/core_env.o CC [M] drivers/net/ethernet/mellanox/mlxsw/core_hwmon.o CC [M] drivers/net/ethernet/mellanox/mlxsw/core_thermal.o CC [M] drivers/net/ethernet/microchip/sparx5/sparx5_phylink.o LD [M] drivers/net/ethernet/microchip/sparx5/sparx5-switch.o CC [M] drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.o LD [M] drivers/net/phy/libphy.o LD [M] drivers/net/ethernet/netronome/nfp/nfp.o LD [M] drivers/net/ethernet/mellanox/mlxsw/mlxsw_core.o AR drivers/net/built-in.a AR drivers/built-in.a CHK kernel/kheaders_data.tar.xz GEN kernel/kheaders_data.tar.xz CC [M] kernel/kheaders.o AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 LD [M] kernel/kheaders.ko LD [M] drivers/net/phy/qcom/at803x.ko LD [M] drivers/net/phy/qcom/qca807x.ko LD [M] drivers/net/phy/phylink.ko LD [M] drivers/net/phy/libphy.ko LD [M] drivers/net/phy/sfp.ko LD [M] drivers/net/phy/marvell10g.ko LD [M] drivers/net/phy/marvell.ko LD [M] drivers/net/phy/marvell-88x2222.ko LD [M] drivers/net/mdio/mdio-i2c.ko LD [M] drivers/net/ethernet/huawei/hinic/hinic.ko LD [M] drivers/net/ethernet/mellanox/mlxsw/mlxsw_core.ko LD [M] drivers/net/ethernet/microchip/sparx5/sparx5-switch.ko LD [M] drivers/net/ethernet/netronome/nfp/nfp.ko NM .tmp_vmlinux.kallsyms2.syms KSYMS .tmp_vmlinux.kallsyms2.S AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o CC arch/x86/boot/compressed/kaslr.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#3403) Building the tree with the patch make[1]: Entering directory '/home/nipa/net-next/wt-1/build_32bit' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_32bit' SYNC include/config/auto.conf GEN Makefile GEN Makefile CALL ../scripts/checksyscalls.sh CC net/ethtool/eeprom.o CC [M] drivers/net/mdio/mdio-i2c.o CC net/ethtool/module.o CC drivers/net/phy/sfp-bus.o CC [M] drivers/net/phy/qcom/at803x.o CC [M] drivers/net/phy/qcom/qca807x.o CC [M] drivers/net/phy/phy.o AR drivers/net/phy/built-in.a CC net/ethtool/ioctl.o CC [M] drivers/net/phy/phy_device.o CC [M] drivers/net/phy/marvell-88x2222.o CC [M] drivers/net/phy/marvell10g.o CC [M] drivers/net/phy/phylink.o CC [M] drivers/net/ethernet/microchip/sparx5/sparx5_phylink.o CC [M] drivers/net/ethernet/huawei/hinic/hinic_ethtool.o CC [M] drivers/net/phy/sfp.o LD [M] drivers/net/ethernet/microchip/sparx5/sparx5-switch.o LD [M] drivers/net/ethernet/huawei/hinic/hinic.o AR net/ethtool/built-in.a AR net/built-in.a CC [M] drivers/net/phy/marvell.o LD [M] drivers/net/phy/libphy.o CC [M] drivers/net/ethernet/mellanox/mlxsw/core_thermal.o CC [M] drivers/net/ethernet/mellanox/mlxsw/core_hwmon.o CC [M] drivers/net/ethernet/mellanox/mlxsw/core_env.o CC [M] drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.o LD [M] drivers/net/ethernet/netronome/nfp/nfp.o LD [M] drivers/net/ethernet/mellanox/mlxsw/mlxsw_core.o AR drivers/net/built-in.a AR drivers/built-in.a CHK kernel/kheaders_data.tar.xz GEN kernel/kheaders_data.tar.xz CC [M] kernel/kheaders.o AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 LD [M] kernel/kheaders.ko LD [M] drivers/net/phy/qcom/at803x.ko LD [M] drivers/net/phy/qcom/qca807x.ko LD [M] drivers/net/phy/phylink.ko LD [M] drivers/net/phy/libphy.ko LD [M] drivers/net/phy/sfp.ko LD [M] drivers/net/phy/marvell10g.ko LD [M] drivers/net/phy/marvell.ko LD [M] drivers/net/phy/marvell-88x2222.ko LD [M] drivers/net/mdio/mdio-i2c.ko LD [M] drivers/net/ethernet/huawei/hinic/hinic.ko LD [M] drivers/net/ethernet/mellanox/mlxsw/mlxsw_core.ko LD [M] drivers/net/ethernet/microchip/sparx5/sparx5-switch.ko LD [M] drivers/net/ethernet/netronome/nfp/nfp.ko NM .tmp_vmlinux.kallsyms2.syms KSYMS .tmp_vmlinux.kallsyms2.S AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o CC arch/x86/boot/compressed/kaslr.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#3404)