Using -Oline -j 72 W=1 redirect to /tmp/tmp.QPeokBsZYV and /tmp/tmp.Wi1DibQIWi CC=ccache gcc gcc (GCC) 14.1.1 20240507 (Red Hat 14.1.1-1) Tree base: 2490785ee778 ("net: remove drivers@pensando.io from MAINTAINERS") Baseline building the tree make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit' SYNC include/config/auto.conf GEN Makefile GEN Makefile CALL ../scripts/checksyscalls.sh CC [M] net/can/j1939/main.o CHK kernel/kheaders_data.tar.xz CC [M] drivers/net/can/usb/kvaser_usb/kvaser_usb_core.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-chip-fifo.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-core.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-crc16.o LD [M] drivers/net/can/usb/kvaser_usb/kvaser_usb.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-ethtool.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-ring.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-rx.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-tef.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-timestamp.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.o CC [M] drivers/net/can/spi/mcp251xfd/mcp251xfd-dump.o CC [M] drivers/net/ethernet/wangxun/libwx/wx_lib.o CC [M] drivers/net/ethernet/wangxun/txgbe/txgbe_main.o CC [M] drivers/net/ethernet/wangxun/txgbe/txgbe_irq.o LD [M] drivers/net/can/spi/mcp251xfd/mcp251xfd.o LD [M] drivers/net/ethernet/wangxun/txgbe/txgbe.o LD [M] drivers/net/ethernet/wangxun/libwx/libwx.o CC [M] net/can/j1939/transport.o LD [M] net/can/j1939/can-j1939.o CC [M] net/openvswitch/conntrack.o LD [M] net/openvswitch/openvswitch.o CC [M] drivers/net/bonding/bond_main.o LD [M] drivers/net/bonding/bonding.o CC net/core/dev.o AR net/core/built-in.a AR net/built-in.a CC [M] drivers/net/ethernet/marvell/mvpp2/mvpp2_main.o LD [M] drivers/net/ethernet/marvell/mvpp2/mvpp2.o AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin GEN .vmlinux.objs MODPOST Module.symvers UPD include/generated/utsversion.h CC init/version-timestamp.o LD .tmp_vmlinux.kallsyms1 NM .tmp_vmlinux.kallsyms1.syms KSYMS .tmp_vmlinux.kallsyms1.S AS .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 CC [M] drivers/net/ethernet/wangxun/libwx/libwx.mod.o CC [M] drivers/net/ethernet/wangxun/txgbe/txgbe.mod.o LD [M] drivers/net/can/spi/mcp251xfd/mcp251xfd.ko LD [M] drivers/net/can/usb/kvaser_usb/kvaser_usb.ko CC [M] drivers/net/ethernet/marvell/mvpp2/mvpp2.mod.o CC [M] drivers/net/bonding/bonding.mod.o NM .tmp_vmlinux.kallsyms2.syms LD [M] drivers/net/ethernet/marvell/mvpp2/mvpp2.ko KSYMS .tmp_vmlinux.kallsyms2.S LD [M] drivers/net/ethernet/wangxun/libwx/libwx.ko LD [M] drivers/net/ethernet/wangxun/txgbe/txgbe.ko LD [M] drivers/net/bonding/bonding.ko CC [M] net/can/j1939/can-j1939.mod.o LD [M] net/can/j1939/can-j1939.ko CC [M] net/openvswitch/openvswitch.mod.o LD [M] net/openvswitch/openvswitch.ko AS .tmp_vmlinux.kallsyms2.o LD vmlinux NM System.map SORTTAB vmlinux RELOCS arch/x86/boot/compressed/vmlinux.relocs RSTRIP vmlinux CC arch/x86/boot/version.o OBJCOPY arch/x86/boot/compressed/vmlinux.bin VOFFSET arch/x86/boot/compressed/../voffset.h CC arch/x86/boot/compressed/misc.o CC arch/x86/boot/compressed/kaslr.o GZIP arch/x86/boot/compressed/vmlinux.bin.gz MKPIGGY arch/x86/boot/compressed/piggy.S AS arch/x86/boot/compressed/piggy.o LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h OBJCOPY arch/x86/boot/vmlinux.bin AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin BUILD arch/x86/boot/bzImage Kernel: arch/x86/boot/bzImage is ready (#239) Building the tree before the patch make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit' SYNC include/config/auto.conf GEN Makefile GEN Makefile CALL ../scripts/checksyscalls.sh CC [M] net/can/j1939/transport.o LD [M] net/can/j1939/can-j1939.o CHK kernel/kheaders_data.tar.xz MODPOST Module.symvers Kernel: arch/x86/boot/bzImage is ready (#239) CC [M] net/can/j1939/can-j1939.mod.o LD [M] net/can/j1939/can-j1939.ko Building the tree with the patch make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit' GEN Makefile # # configuration written to .config # make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit' SYNC include/config/auto.conf GEN Makefile GEN Makefile CALL ../scripts/checksyscalls.sh CC [M] net/can/j1939/transport.o LD [M] net/can/j1939/can-j1939.o CHK kernel/kheaders_data.tar.xz MODPOST Module.symvers Kernel: arch/x86/boot/bzImage is ready (#239) CC [M] net/can/j1939/can-j1939.mod.o LD [M] net/can/j1939/can-j1939.ko