1:  96c920b08ab4 ! 1:  a81b47442eb5 wifi: rt2x00: start the link tuner when an interface is added
    @@ Commit message
     
         Fixes: d96324703ffa ("rt2x00: merge agc and vco works with link tuner")
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
    +    Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
     
      ## drivers/net/wireless/ralink/rt2x00/rt2x00mac.c ##
     @@ drivers/net/wireless/ralink/rt2x00/rt2x00mac.c: int rt2x00mac_add_interface(struct ieee80211_hw *hw,
2:  5503e17f1d45 < -:  ------------ wifi: rt2800: calibrate the crystal of RT3593 with the beacons
-:  ------------ > 2:  5ce993491504 wifi: rt2800: calibrate the crystal of RT3593 with the beacons
3:  15a25ec7a91c ! 3:  2f4afc902fb2 wifi: rt2800: make MCS 16 fall back to MCS 8 on devices with 3 TX chains
    @@ drivers/net/wireless/ralink/rt2x00/rt2800lib.c: void rt2800_txdone_entry(struct
     +		 * frame that was sent below MCS16 after a three stream rate
     +		 * skipped MCS9 to MCS15.
     +		 */
    -+		if (rt2x00_is_3t(rt2x00dev) && mcs >= 16 && real_mcs < 16)
    ++		if (rt2x00_is_3t(rt2x00dev) && mcs >= 16 && real_mcs <= 8)
     +			txdesc.retry -= 7;
      	} else {
      		/*
4:  a849dbe14ded ! 4:  f4bb0ce43229 wifi: rt2800: don't report an A-MPDU length to minstrel_ht
    @@ Commit message
         below the TODO comment.
     
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
    +    Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
     
      ## drivers/net/wireless/ralink/rt2x00/rt2800lib.c ##
     @@ drivers/net/wireless/ralink/rt2x00/rt2800lib.c: static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
6:  85c8faf9d4b0 ! 5:  a2fdeaded17c wifi: rt2800usb: enable RX bulk aggregation
    @@ drivers/net/wireless/ralink/rt2x00/rt2800usb.c: static int rt2800usb_enable_radi
      	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
     -	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
     +	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
    -+			   rt2x00dev->rx->usb_maxpacket == 512);
    ++			   rt2x00dev->rx->usb_maxpacket >= 512);
      	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
      	/*
      	 * Total room for RX frames in kilobytes, PBF might still exceed
    @@ drivers/net/wireless/ralink/rt2x00/rt2800usb.c: static void rt2800usb_work_txdon
     +	word = rt2x00_desc_read(data, 0);
     +	rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
     +
    -+	if (!rx_pkt_len ||
    -+	    RXINFO_DESC_SIZE + rx_pkt_len + RXD_DESC_SIZE > len ||
    -+	    rx_pkt_len & 0x3)
    ++	if (WARN_ON_ONCE(RXINFO_DESC_SIZE + rx_pkt_len + RXD_DESC_SIZE > len) ||
    ++	    WARN_ON_ONCE(rx_pkt_len & 0x3) ||
    ++	    WARN_ON_ONCE(rx_pkt_len < min_seg_len))
     +		return 0;
     +
     +	return RXINFO_DESC_SIZE + rx_pkt_len + RXD_DESC_SIZE;
5:  0c4eebe3772c = 6:  68ddbbf39763 wifi: rt2800: support A-MSDU in A-MPDU
7:  c37126e5aa78 < -:  ------------ wifi: rt2x00usb: use a threaded NAPI with GRO for RX
-:  ------------ > 7:  b76e3994ba6b wifi: rt2x00usb: use a threaded NAPI with GRO for RX