1:  4f2dafc2e130 ! 1:  4861aa44e4e9 wifi: rtlwifi: rc: start no BA session for QoS null frames
    @@ Commit message
     
         Only start BA sessions for frames that carry data.
     
    -    Test results (2.4 GHz):
    -       before after
    -    TX 7.0    6.1
    -    RX 28.3   29.1
    -
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
     
      ## drivers/net/wireless/realtek/rtlwifi/rc.c ##
2:  97490a522c8a ! 2:  892a1c49b02c wifi: rtlwifi: rtl8192d: report no signal for frames without PHY status
    @@ Commit message
         Only the first frame of an A-MPDU comes with the PHY status.
         This makes mac80211 report the correct value when queried from iw.
     
    -    Test results (2.4 GHz):
    -       before after
    -    TX 6.1    5.2
    -    RX 29.1   27.1
    -
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
     
      ## drivers/net/wireless/realtek/rtlwifi/rtl8192d/trx_common.c ##
    @@ drivers/net/wireless/realtek/rtlwifi/rtl8192d/trx_common.c: bool rtl92d_rx_query
      		_rtl92d_translate_rx_signal_stuff(hw, skb, stats, pdesc,
      						  p_drvinfo);
     +	} else {
    -+		/* Only the first frame of an A-MPDU has the PHY status. */
     +		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
      	}
      	/*rx_status->qual = stats->signal; */
3:  bb1ede2c7251 ! 3:  2670e2b502ef wifi: rtlwifi: usb: unify the RX code path
    @@ Commit message
         to _rtl_usb_rx_process to unify the code path.
     
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
    +    Acked-by: Ping-Ke Shih <pkshih@realtek.com>
     
      ## drivers/net/wireless/realtek/rtlwifi/usb.c ##
     @@ drivers/net/wireless/realtek/rtlwifi/usb.c: static int _rtl_prep_rx_urb(struct ieee80211_hw *hw, struct rtl_usb *rtlusb,
-:  ------------ > 4:  d9348282f1b2 wifi: rtlwifi: usb: move the radiotap headroom size to usb.h
4:  af51a4124fae ! 5:  5d2d43be84e5 wifi: rtlwifi: rtl8192du: enable USB RX aggregation
    @@ Commit message
     
         Allow RX aggregation of up to 48 pages of 128 bytes or 24 with two MACs.
     
    +    In an aggregated transfer, rtl92du_rx_segregate_hdl() copies each
    +    frame into a new skb with room for the radiotap header like in usb.c.
    +    The last frame reuses the original skb by pulling it to the frame's start
    +    and trimmed to its length.
    +
         Test results (2.4 GHz):
            before after
         TX 5.2    6.4
         RX 27.1   32.0
     
         Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
    +    Acked-by: Ping-Ke Shih <pkshih@realtek.com>
     
      ## drivers/net/wireless/realtek/rtlwifi/rtl8192d/reg.h ##
     @@
    @@ drivers/net/wireless/realtek/rtlwifi/rtl8192du/trx.c: int rtl92du_tx_post_hdl(st
     +			return;
     +		}
     +
    -+		new_skb = dev_alloc_skb(pkt_size + RTL92DU_RX_HEADROOM);
    ++		new_skb = dev_alloc_skb(pkt_size + RTL_RADIO_TAP_SIZE_RSV);
     +		if (!new_skb)
     +			break;
    -+		skb_reserve(new_skb, RTL92DU_RX_HEADROOM);
    ++		skb_reserve(new_skb, RTL_RADIO_TAP_SIZE_RSV);
     +		skb_put_data(new_skb, rxdesc, pkt_size);
     +		__skb_queue_tail(queue, new_skb);
     +
    @@ drivers/net/wireless/realtek/rtlwifi/rtl8192du/trx.h
      
      #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER			0xF5
      
    -+#define RTL92DU_RX_HEADROOM				32
     +#define RTL92DU_RX_AGG_ALIGN				128
     +
      #define WMM_NORMAL_PAGE_NUM_PUBQ_92D			0x65
5:  03d85e72056f < -:  ------------ wifi: rtlwifi: rtl8192d: let the firmware use all rates